Manufacturing types
Wheel brushes
Wheel Brushes
Wheel brushes are made with CeramiX® abrasive nylon filament molded into a urethane based composite hub construction. They provide a consistent finish with controlled surface abrading action and low filament breakage.
Narrow Face Wheel Brushes are used for cleaning, polishing and deburring recessed applications such as small openings, slots, machined grooves,
fine deburring on medical instruments and gear splines. Filament is molded into a urethane based composite hub construction providing controlled filament density and balanced wheel enhancing brush life.
With the double brush width, the CeramiX® Wide Face Wheel brush covers more surface area. Use to increase reach and efficiency for larger jobs. The extra wide brush face allows for greater surface cleaning.
D | F | E | S | MAX RPM | Tipo Type |
||||
---|---|---|---|---|---|---|---|---|---|
mm | inch | mm | inch | mm | inch | mm | inch | ||
76 | 3 | 10 | 3/8 | 10 | 3/8 | 25 | 1 | 10000 | Narrow |
76 | 3 | 10 | 3/8 | 6 | 1/4 | 25 | 1 | 10000 | Narrow |
102 | 4 | 16 | 5/8 | 12 | 1/2 | 25 | 1 | 10000 | Narrow |
102 | 4 | 16 | 5/8 | 6 | 1/4 | 25 | 1 | 10000 | Narrow |
127 | 5 | 16 | 5/8 | 12 | 1/2 | 38 | 1-1/2 | 6000 | Narrow |
127 | 5 | 16 | 5/8 | 6 | 1/4 | 38 | 1-1/2 | 6000 | Narrow |
152 | 6 | 16 | 5/8 | 12 | 1/2 | 51 | 2 | 6000 | Narrow |
152 | 6 | 16 | 5/8 | 6 | 1/4 | 51 | 2 | 6000 | Narrow |
152 | 6 | 51 | 2 | 25 | 1 | 32 | 1-1/4 | 3600 | |
152 | 6 | 51 | 2 | 51 | 2 | 32 | 1-1/4 | 3600 | Wide |
203 | 8 | 51 | 2 | 25 | 1 | 32 | 1-1/4 | 3600 | |
203 | 8 | 51 | 2 | 25 | 1 | 57 | 2-1/4 | 3600 | |
203 | 8 | 51 | 2 | 51 | 2 | 57 | 2-1/4 | 3600 | Wide |
254 | 10 | 51 | 2 | 25 | 1 | 38 | 1-1/2 | 3600 | |
254 | 10 | 51 | 2 | 25 | 1 | 82 | 3-1/4 | 3600 | |
254 | 10 | 51 | 2 | 51 | 2 | 82 | 3-1/4 | 3600 | Wide |
305 | 12 | 51 | 2 | 25 | 1 | 38 | 1-1/2 | 1800 | |
305 | 12 | 51 | 2 | 25 | 1 | 76 | 3 | 1800 | |
355 | 14 | 51 | 2 | 25 | 1 | 38 | 1-1/2 | 1800 | |
355 | 14 | 51 | 2 | 25 | 1 | 89 | 3-1/2 | 1800 |
Adapters
Slip-fit metal adapters are used for mounting nylon abrasive wheel brushes into smaller shafts. Sold in pairs. Available for 108mm – 4-1/4” and 133mm 5-1/4” brush I.D. wheels and 51mm – 2” brush I.D. wheels.
In addition to these, a new set of adapters has been designed and patented for shell mill holder mounting (CNC machines).
Wheel brushes applications
- Deburring keyways, slots and machine grooves in parts
- Deburring gear splines
- Honing and finishing of cylindrical bores
- Hone drill point lip edge on carbide drills
- Deburring cross holes in large bearing bores
- Edge radiusing
- Polishing flutes on carbide drills following post coat process
- Deburring seal grooves in turbine engine cases and small aircraft parts
- Turbine blade surface finishing